cutting machine manufacturer

News List

Contact Us

Tel:0086-515-88868958  88663969

Fax:0086-515-88869723  88667955

Phone:0086-17305156202

Whatspp:0086-17305156202

Wechat:0086-17305156202

Email:amelia@ychlxj.com


How to adjust the pressure of the rocker cutting machine

Location: Home >> NEWS >> Common problem

How to adjust the pressure of the rocker cutting machine

Timeline:2019-02-19 Author:HUASEN-Amelia Click count:

How to adjust the pressure of the rocker cutting machine

cutting machine

    The rocker cutting machine is a small die-cutting machine that is manually operated and is suitable for cutting products with small specifications. Because the size of the cut die is different and the thickness of the material is not the same, the pressure required is not complete. The following describes how the rocker can adjust the pressure. There are two main ways:


1、Under normal circumstances, fine-tune the machine pressure by the knob on the swing arm head, as shown in the following figure:


cutting press

Adjustment knob: When the knob is adjusted to the minimum, the pressure is minimum; when the knob is adjusted to the maximum, the pressure is maximum


2、Adjust the hydraulic valve inside the cutting machine


Step 1、 Adjust the screw pointed as below photo and adjust the pressure to the left and right.


HUASEN


Step 2、After adjusting to the applicable pressure, tighten the screw pointed as below photo


valve

relative:rockercuttingmachine

Latest View:

     微信图片_20181119105614.png


1494635332479079.png

欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码
邮箱
邮箱
地址
地址