How to deal with the oil leakage from the column of the four-column cutting machine

    The oil leakage of the four-column cutting machine column is a common oil leakage problem. The hydraulic oil is brought up by the movement of the column up and down. If there is oil in the column and it is in the oil tank, it does not spill to the workbench, this is a normal phenomenon and does not need to be treated. If the hydraulic oil spills onto the workbench and pollutes the product, don't worry. This is a very common problem. We first find a thin iron wire, then poke it down at the oil return hole on the guide sleeve, and then blow the waste away with an air gun. In this way, the hydraulic oil will return to the machine and will not overflow onto the workbench.

In conclusion, the oil leakage of the four-column cutting machine column is a normal phenomenon, as long as it does not spill onto the workbench, it can not be handled. If it overflows onto the workbench, it means that the oil return hole is blocked. It is necessary to discharge the waste scraps in the oil return hole to ensure the normal oil return of the oil return hole. In case of machine problems, it is recommended to contact the cutting machine manufacturer at the first time. The cutting machine manufacturer will help you solve the problem. Do not disassemble the cutting machine and repair it by yourself to prevent unnecessary trouble. Thank you!