how to seting die cutter

(1) When setting the cutter, be sure to loosen the setting handwheel so that the setting lever touches the cutting point control switch. Otherwise, the setting operation cannot be generated when the cutter setting switch is turned ON.

(2) When working, the cutting knife should be placed in the center position of the upper pressing plate as much as possible to avoid the unilateral wear of the machine and affect its life.

(3) Replace the new cutter. If the height is not the same, please reset it according to the setting method. Precision four-column cutting machine.

(4) When the automatic cutting machine is in motion, please leave the cutting knife or the seesaw. It is strictly forbidden to use the hand to help the cutting die to cut it to avoid danger.

(5) If the operator needs to leave the position temporarily, please turn off the motor switch to avoid damage to the machine by improper operation.

(6) Please avoid overloading to avoid damage to the machine and reduce the service life.